Recycling Facility in Florida Latest Recipient of Aluminum Beverage Can Capture Grant Program Funded by Ardagh Metal Packaging and Crown Holdings
Grant Enables Additional Can Capture Equipment That Will Result in 3.5 Million More Aluminum Beverage Cans Recycled
WASHINGTON, DC (August 18, 2021) – Ardagh Metal Packaging and Crown Holdings funded a new aluminum can capture grant awarded to a recycling facility northeast of Orlando that will install additional can capture equipment as part of a larger facility upgrade. Once installed at GEL Recycling’s Port Orange, FL, material recovery facility (MRF), this equipment will result in nearly 3.5 million more beverage cans captured at the facility that were previously missorted.
The GEL facility is the third MRF to receive funding from a grant program facilitated by Can Manufacturers Institute (CMI). CMI partnered with The Recycling Partnership to evaluate and select the grantees, execute the grant program and provide technical assistance to ensure successful implementation.
The grant program builds off the CMI research released last year that found it is critical to capture all used beverage cans (UBC) flowing through MRFs, which play the vital role of sorting single stream recyclables. This research concluded that most MRFs in the United States would not be able to operate without the revenue from UBCs considering they are consistently the most valuable beverage package material in the recycling stream. Capturing more beverage cans means a healthier recycling system.
The grant funds provided to GEL Recycling will be used to purchase a metal detector addition to its optical sorter. The equipment will help eliminate UBCs from being missorted to the plastic pile. The facility is a dual-stream MRF processing 24,000 tons per year mostly from Volusia County on Florida’s northeast coast. It is undergoing a general upgrade and this grant ensures the MRF will have modern metal detection.
When the additional nearly 3.5 million cans are captured and recycled each year at this one MRF, it will generate more than $56,000 in new annual revenue and produce enough energy savings to power nearly 1.4 million homes for one hour. Further, the carbon dioxide equivalent emissions avoided each year will be the same as is generated from an average passenger vehicle driving 868,000 miles, which is the distance of driving from New York to San Francisco 300 times.
“The environmental and economic impact of recycling aluminum cans is astounding,” said CMI President Robert Budway. “Can manufacturers like Ardagh and Crown ultimately convert billions of used beverage cans into new cans each year, which is why the aluminum beverage can is the textbook example of the circular economy. These grants ensure millions more aluminum beverage cans complete the circular journey into new cans, which can happen infinitely since metal recycles forever.”
The first two grantees in the grant program were Independent Texas Recyclers, Houston, TX, and Curbside Management, Ashville, NC. The equipment installed from the first two grants will result in more than 36 million aluminum cans captured and recycled each year that likely would have otherwise been missorted and landfilled. Collectively, the first three grants have catalyzed the installation of additional can capture equipment that will result in nearly 40 million aluminum cans recycled annually. Additional grantees as part of this pilot phase of the can capture grant program will be announced later this year.
This grant program is the latest aluminum beverage can industry funded effort to build on its industry-leading recycling rates and recycled content. The grant program will foster additional examples of MRFs that have successfully invested in can capture equipment, providing case studies to spur more MRFs to invest in aluminum can capture equipment, and, in turn, secure the revenue and environmental benefits from greater recycling of aluminum cans.
To learn more about the importance to the recycling system of capturing cans and CMI’s efforts to ensure more cans are correctly sorted at MRFs, visit cancentral.com/cansdriverecycling. For those interested in learning more about the grant process, visit recyclingpartnership.org/can-capture-grant.
Can Manufacturers Institute
The Can Manufacturers Institute (CMI) is the national trade association of the metal can manufacturing industry and its suppliers in the United States. The can industry accounts for the annual domestic production of approximately 130.7 billion food, beverage and general line cans; employs more than 28,000 people with plants in 33 states, Puerto Rico and American Samoa; and generates about $15.7 billion in direct economic activity. CMI members are committed to providing safe, nutritious and refreshing canned food and beverages to consumers in the most sustainable packaging. For more information, visit cancentral.com.
The Recycling Partnership
The Recycling Partnership is the action agent transforming the U.S. residential recycling system for good. Our team operates at every level of the recycling value chain and works on the ground with thousands of communities to transform underperforming recycling programs and tackle circular economy challenges. As the leading organization in the country that engages the full recycling supply chain, from working with companies to make their packaging more circular and help them meet climate and sustainability goals, to working with government to develop policy solutions to address the systemic needs of the U.S. recycling system, The Recycling Partnership positively impacts recycling at every step in the process. Since 2014, the nonprofit change agent diverted 230 million pounds of new recyclables from landfills, saved 465 million gallons of water, avoided more than 250,000 metric tons of greenhouse gases, and drove significant reductions in targeted contamination rates. Learn more at recyclingpartnership.org.